Grandstream GDMS Cloud
This article describes the installation and configuration steps for Grandstream GDMS Cloud devices.
Connecting |
Log in to your Grandstream Cloud account at https://www.gdms.cloud/gwn
Go to Settings / Wi-Fi and configure:
WiFi: Enabled
SSID: GuestWiFi (set any SSID name)
Client IP Assignment: NAT
Enable Captive portal: Enabled
Captive Portal Policy: wifipolicy
SSID Band: Dual Band
Security Type: Open
SSID: GuestWiFi (set any SSID name)
Client IP Assignment: NAT
Enable Captive portal: Enabled
Captive Portal Policy: wifipolicy
SSID Band: Dual Band
Security Type: Open
Go to Settings / Profiles page:
Name: GuestWiFi
Splash page: External
Platform: Universal platform
External Splash Server Address: https://connectwifi.cloud/login/grandstream
RADIUS Authentication: RADIUS
Redirect URL: your redirect URL
Enable HTTPS Redirection: Enabled
Enable Secure Portal: Disabled
Pre-Authentication Rule(s): add following domains
socialwifionline.com
connectwifi.cloud
192.250.224.84
Always white list all the Social sites as described here. Kindly scroll down to the bottom and white list all.
From Policy List page configure RADIUS Server:
Name: RADIUS
Authentication Servers:
Server Address: 192.250.224.84
Port: 1812
Secret: (contact our office)
RADIUS Accounting Servers:
Server Address: 192.250.224.84
Port: 1813
Secret: (contact our office)
Attempt Limit: 1
RADIUS retry timeout: 10
Accounting Update Interval: 600
Dynamic VLAN: Disabled
Authentication Servers:
Server Address: 192.250.224.84
Port: 1812
Secret: (contact our office)
RADIUS Accounting Servers:
Server Address: 192.250.224.84
Port: 1813
Secret: (contact our office)
Attempt Limit: 1
RADIUS retry timeout: 10
Accounting Update Interval: 600
Dynamic VLAN: Disabled
If you face any issues, please get in touch with us at support@socialwifionline.com.
Server Information
Related Articles
Juniper Mist Cloud Controller
Setting up a custom guest portal page with Juniper Mist involves creating a captive portal and configuring parameters for authentication on the RADIUS server. Here are the steps you can follow: Access your Juniper Mist account through the Mist Cloud ...Ubiquiti UniFi Cloud Controller
Ubiquiti UniFi Cloud Controller This article describes the installation and configuration steps for Ubiquiti UniFi Cloud Controller in Legacy mode. Instructions in this guide are only for older UniFi controllers with Legacy mode and shouldn’t be used ...Mikrotik Configuration
This article describes the installation and configuration steps for Mikrotik routers. The configuration applies to Mikrotik routers with RouterOS L4 and beyond. Configuring parameters Winbox is a small utility that allows the administration of ...Ruijie / Reyee
coThis article describes installation and configuration steps for Ruijie / Reyee. Gateway tested EG209GS, ReyeeOS 1.216.1504. Radius support for login/logout was added for EG305GH-E and EG310GH-E models. Currently, it is not possible to control the ...TP Link Omada Controller
This article describes the installation and configuration steps for TP-Link Omada Cloud-Based Controller. You will need Omada Controller v5.3.1 or above in order to proceed. Our test was performed with Omada Cloud controller v5.9.41. CONNECTING Login ...