TP Link Omada controller integration with SocialWiFiOnline

TP Link Omada Controller

This article describes the installation and configuration steps for TP-Link Omada Cloud-Based Controller.
You will need Omada Controller v5.3.1 or above in order to proceed. Our test was performed with Omada Cloud controller v5.9.41.

CONNECTING            

Login to Omada Controller.
Go to the Authentication / Portal page.
Configure as follows:


Authentication Type – External RADIUS Server
Authentication Timeout – 8 hours
NAS ID – TP-Link
Authentication Mode – PAP
Portal Customization – External Web Portal – connectwifi.cloud/login/omada                                                                              

Landing Page – The Original URL
To configure the RADIUS server go to the Authentication / RADIUS Profile page and configure with:



Name
 – Socialwifionline-radius (or any name you wish)                                                                                                                                                      
VLAN Assignment – Disabled
Authentication Server IP – 192.250.224.84
Authentication Port – 1812
Authentication Password – (contact our office)
Radius Accounting – Enabled
Accounting Server IP– 192.250.224.84
Accounting port- 1813

Go to Authentication / Profile / Access Control, enable Pre-Authentication Access, and add the following domains:

connectwifi.cloud
socialwifionline.com
192.250.224.84


If you want to change default Omada Controller SSL and implement your own domain, you need to modify Login URL in the Hotspot- Advanced page as:  https://domain:port” 


    • Related Articles

    • Ubiquiti UniFi Cloud Controller

      Ubiquiti UniFi Cloud Controller This article describes the installation and configuration steps for Ubiquiti UniFi Cloud Controller in Legacy mode. Instructions in this guide are only for older UniFi controllers with Legacy mode and shouldn’t be used ...

    • Ruckus Virtual SmartZone

      Ruckus Virtual SmartZone This article describes the installation and configuration steps for Ruckus Virtual SmartZone controller. Our test was performed with controller version 3.6.2.0.222, Control Plane Software version 3.6.2.0.63, and AP Firmware ...

    • Aruba Central

      This article describes the installation and configuration steps for Aruba Central. Our test was performed with Aruba AP-303-RW. Aruba Central Log in to your account using the Aruba Central portal. From the menu on the left, under Wireless ...